Aboveground Tank, Vessel & Piping Inspections in Alaska

NDT Tanknicians provides API 653 and STI SP001 aboveground storage tank inspections, API 510 pressure vessel and API 570 piping inspections, and nondestructive testing for industrial facilities across Alaska.

Or call 866-954-2915

Certified inspectors
API 653, API 510, API 570 and STI SP001

A written report for every job
Findings, thickness data and next-inspection dates

Inspectors nationwide
All 50 states, Canada and Mexico

What we inspect

Not sure which standard applies? Tell us what the equipment is and what it stores; we’ll confirm the scope.

Inspections across Alaska

We inspect tanks, pressure vessels and piping at oil production sites, refineries, oil terminals and rural bulk fuel tank farms across Alaska.

Most of Alaska’s crude oil is produced on the North Slope and carried by pipeline to the port at Valdez, and the state’s refineries are in the Prudhoe Bay region, Kenai, Valdez and near Fairbanks. Sites like these run fuel and chemical storage tanks, air receivers and process piping. API 653 commonly applies to larger field-erected steel tanks; STI SP001 commonly applies to shop-built and certain smaller field-erected tanks.

Whatever your equipment stores, our inspections find corrosion and other damage early, so you can plan maintenance and stay on schedule.

Alaska requirements to plan around

  • SPCC plans. A facility may need an SPCC plan if its total aboveground oil storage capacity is more than 1,320 gallons, counting only containers of 55 gallons or more, and a spill could reach waterways. The plan’s inspection program usually follows API 653 or STI SP001. EPA rule (40 CFR 112.1)
  • Contingency plans. Oil terminals, pipelines and oil exploration and production facilities need an oil discharge prevention and contingency plan approved by the Alaska Department of Environmental Conservation (ADEC). An oil terminal, a site that stores, transfers, processes or refines oil, is exempt if its effective storage capacity is less than 5,000 barrels of crude oil or less than 10,000 barrels of noncrude oil. Alaska law (AS 46.04.030)
  • Tank and piping inspections. At those facilities, field-constructed tanks are maintained and inspected consistent with API 653 or API RP 12R1, as appropriate, and shop-built tanks to STI SP001, API 653 or another standard ADEC approves. Facility oil piping is maintained and inspected under an API 570 program or an approved equivalent. Alaska rule (18 AAC 75.065)

What you receive and how to start

Every inspection ends with a written report: findings, thickness data and recommended next-inspection dates, ready for your SPCC plan or integrity program.

  1. Tell us what you have. Rough details are fine. You do not need to know which standard applies.
  2. We confirm the scope and send a quote.
  3. A certified inspector comes to your site.
  4. You receive the written report.

Our inspectors hold API 653, API 510, API 570 and STI SP001 certifications, our NDT technicians are certified, and our crews are OSHA 10, 30 and 40-hour trained. We are based near Kansas City, MO, with a network of inspectors serving all 50 states, Canada and Mexico. Our inspectors’ certifications · Where we work

Frequently asked questions

Do I need to know which standard applies before asking for a quote?

No. Tell us what the equipment is, what it stores and roughly how big it is. We will confirm whether API 653, STI SP001, API 510, API 570 or your SPCC plan sets the scope.

Can ADEC change the internal inspection interval for a terminal tank?

Yes. ADEC may shorten intervals for a field-constructed tank older than 30 years, a riveted or bolted tank, a tank with a demonstrated structural, corrosion or foundation problem, or after a significant seismic event. Extending a tank’s initial internal inspection beyond 10 years needs a request, based on API 653 Table 6.1, that ADEC approves. A risk-based schedule needs an assessment signed by a registered engineer, with intervals of no more than 30 years. Our API 653 reports give ADEC and that engineer condition records to review.

Request an inspection quote

Send what you have; we will help with the rest. Helpful details:

  • The tanks, vessels or piping, with approximate size or capacity
  • What each one stores, and whether it is in service
  • Your last inspection report, if you have one
  • The site location and your timing