Aboveground Tank, Vessel & Piping Inspections in Colorado

NDT Tanknicians provides API 653 and STI SP001 aboveground storage tank inspections, API 510 pressure vessel and API 570 piping inspections, and nondestructive testing for industrial facilities across Colorado.

Or call 866-954-2915

Certified inspectors
API 653, API 510, API 570 and STI SP001

A written report for every job
Findings, thickness data and next-inspection dates

Inspectors nationwide
All 50 states, Canada and Mexico

What we inspect

Not sure which standard applies? Tell us what the equipment is and what it stores; we’ll confirm the scope.

Inspections across Colorado

We inspect tanks, pressure vessels and piping at refineries, oil and gas sites and fuel facilities across Colorado.

Colorado’s only petroleum refinery is in Commerce City, where it makes gasoline, jet fuel, diesel and asphalt. On the northern Front Range, Weld County produces most of the state’s crude oil and natural gas. Oil and gas sites use crude oil, condensate and produced water tanks, plus process vessels such as separators and heater treaters. Sites like these run fuel and chemical storage tanks, air receivers and process piping. API 653 commonly applies to larger field-erected steel tanks; STI SP001 commonly applies to shop-built and certain smaller field-erected tanks.

Whatever your equipment stores, our inspections find corrosion and other damage early, so you can plan maintenance and stay on schedule.

Colorado requirements to plan around

  • SPCC plans. A facility may need an SPCC plan if its total aboveground oil storage capacity is more than 1,320 gallons, counting only containers of 55 gallons or more, and a spill could reach waterways. The plan’s inspection program usually follows API 653 or STI SP001. EPA rule (40 CFR 112.1)
  • Fuel tank rules. The Division of Oil and Public Safety regulates aboveground fuel tanks from 660 to 39,999 gallons, with exclusions such as farm and crude oil production tanks. Steel tanks must be inspected and maintained to STI SP001 or API 653, whichever applies, and formal inspections must be done by inspectors who meet that standard’s qualifications. Colorado rule (7 CCR 1101-14)

What you receive and how to start

Every inspection ends with a written report: findings, thickness data and recommended next-inspection dates, ready for your SPCC plan or integrity program.

  1. Tell us what you have. Rough details are fine. You do not need to know which standard applies.
  2. We confirm the scope and send a quote.
  3. A certified inspector comes to your site.
  4. You receive the written report.

Our inspectors hold API 653, API 510, API 570 and STI SP001 certifications, our NDT technicians are certified, and our crews are OSHA 10, 30 and 40-hour trained. We are based near Kansas City, MO, with a network of inspectors serving all 50 states, Canada and Mexico. Our inspectors’ certifications · Where we work

Frequently asked questions

Do I need to know which standard applies before asking for a quote?

No. Tell us what the equipment is, what it stores and roughly how big it is. We will confirm whether API 653, STI SP001, API 510, API 570 or your SPCC plan sets the scope.

Does a used tank need an inspection before it is reinstalled in Colorado?

Yes, if it will hold fuel under the Division of Oil and Public Safety’s tank rules. A used tank must be inspected to STI SP001 or API 653, including a formal external inspection with steel thickness readings for single-walled tanks, and the results go in with the installation permit application. Our reports give you the findings and thickness data that application needs.

Request an inspection quote

Send what you have; we will help with the rest. Helpful details:

  • The tanks, vessels or piping, with approximate size or capacity
  • What each one stores, and whether it is in service
  • Your last inspection report, if you have one
  • The site location and your timing