Aboveground Tank, Vessel & Piping Inspections in Dayton, OH

We inspect aboveground storage tanks, pressure vessels and process piping in Dayton and the surrounding area. Send us your inspection request, and we’ll help confirm the scope.

Or call 866-954-2915

Certified inspectors
API 653, API 510, API 570 and STI SP001

A written report for every job
Findings, thickness data and next-inspection dates

Inspectors nationwide
All 50 states, Canada and Mexico

What we inspect

Inspections for Dayton-area facilities

We inspect tanks, pressure vessels and piping at fuel terminals, chemical and corn-milling plants and other facilities in Montgomery, Greene and Miami counties.

Petroleum bulk terminals operate near Brandt Pike, northeast of downtown Dayton. Chemical and corn wet-milling plants also operate within the city. API 653 commonly applies to larger field-erected steel tanks; STI SP001 commonly applies to shop-built and certain smaller field-erected tanks.

Whatever your equipment stores, our inspections find corrosion and other damage early, so you can plan maintenance and stay on schedule.

Ohio requirements to plan around

  • SPCC plans. A facility may need an SPCC plan if its total aboveground oil storage capacity is more than 1,320 gallons, counting only containers of 55 gallons or more, and a spill could reach waterways. The plan’s inspection program usually follows API 653 or STI SP001. EPA rule (40 CFR 112.1)
  • Fire code tank permits. Ohio’s fire code requires a permit to install, alter, remove or abandon a flammable or combustible liquid tank, or to place it temporarily out of service. Within the City of Dayton, the city fire code adopts the Ohio Fire Code, and the Dayton Fire Department issues these tank permits unless one comes from the State Fire Marshal. Dayton City Code (ch. 92)

What you receive and how to start

Every inspection ends with a written report: findings, thickness data and recommended next-inspection dates, ready for your SPCC plan or integrity program.

  1. Tell us what you have. Rough details are fine. You do not need to know which standard applies.
  2. We confirm the scope and send a quote.
  3. A certified inspector comes to your site.
  4. You receive the written report.

Our inspectors hold API 653, API 510, API 570 and STI SP001 certifications, our NDT technicians are certified, and our crews are OSHA 10, 30 and 40-hour trained. We are based near Kansas City, MO, with a network of inspectors serving all 50 states, Canada and Mexico. Our inspectors’ certifications · Where we work · Tank inspection across Ohio

Frequently asked questions

Do I need to know which standard applies before asking for a quote?

No. Tell us what the equipment is, what it stores and roughly how big it is. We will confirm whether API 653, STI SP001, API 510, API 570 or your SPCC plan sets the scope.

Does a Dayton tank need a fire permit before it comes out of service for an internal inspection?

It may. Ohio’s fire code, which Dayton adopts as its own, requires a permit to place a flammable or combustible liquid tank temporarily out of service, and the permit rule sets no minimum outage length. Within the City of Dayton, check with the Dayton Fire Department’s fire prevention staff before the outage, and plan the outage and the inspection date together. Our API 653 and STI SP001 inspection reports document the tank’s condition for the facility’s records.

Request an inspection quote

Send what you have; we will help with the rest. Helpful details:

  • The tanks, vessels or piping, with approximate size or capacity
  • What each one stores, and whether it is in service
  • Your last inspection report, if you have one
  • The site location and your timing